Shielded SMT RJ45 Connector with EMI
Datasheet: 
MJ5611SE-XXXXXX
MJ5611SE-XXXXXXSMT RJ45 Connector with EMI, Shielded, Right Angle 8P8C, Tab Up, without LED, Flat PIN thickness: 0.35mm, Selective gold plating thickness start from 3u; with solder pad and locating pegs enhancing the retention; With 6 EMI Fingers for reducing signal interference; Length x Width x Height: 15.75 x 15.85 x 13.50 mm. Application: Network switches, Routers, Hub, etc.
Product drawing:
Specifications
| Material | |
| Housing Material | PA66, PA46, LCP(UL94V-0) |
| Contact Material | Phosphor Bronze t-0.35mm |
| Contact Plated | Gold Plating Over Nickel on Mating Area |
| Gold Plating Thickness | 1μ”, 3μ”,6μ”, 15μ”, 30μ”, 50μ” |
| Shielding | 0.2~0.25mm Tin-plated Copper Alloy |
| Electrical | |
| Voltage Rating | 125 V AC RMS |
| Current Rating | 1.5 Amp |
| Contact Resistance | 20mΩ Max. |
| Insulation Resistance | 500MΩ Min. @ 500 VDC |
| Dielectric Withstanding Resistance | 1000 VAC RMS 50Hz/60Hz, 1 Min. |
| Mechanical | |
| Insertion force | 2 contacts=350g 4 contacts=500g 6 contacts=750g 8 contacts=900g 10 contacts=1050g |
| Retention | 7.7kg Between Plug & Receptacle |
| Durability | 750 Cycles Min. |
| Environmental | |
| Storage Temperature | -40°C to +70°C |
| Operation Temperature | -40°C to +70°C |
Shielded RJ45 SMT Connector w/o EMI Version:
Category and Tags:
RJ45 SMT Jack Connector
