2X2 Stacked RJ45 Modular Jack Connector, Shielded, R/A
Datasheet: 
MJIB-88220XX
MJIB-88220XXStacked Series – 2X2 Stacked RJ45
MJIB-88220XX is a R/A Shielded 2X2 Stacked RJ45 Modular Jack Connector, 4 port, Length x Width x Height: 28.20 x 31.25 x 25.30 mm. With 2 Plastic Locating Pegs (Spacing: 25.40 mm) and PCB Ground Tabs (Spacing 30.98mm) providing an enhanced Mouting Retention; Shield EMI Panel Ground Tabs on both sides provide better performance on reducing the EMI Noise and enhancing Mechanical Protection; Internal Spring Tabs give a steady contact between the Plug & Jack. The 2X2 Stacked RJ45 Modular Jack can be used in the applications as ADSL Modems, Routers, Switches, Hubs, and so on.
Product Drawing:
Specifications
| Material | |
| Housing Material | PBT, PA66, PA46, High Temp Nylon UL94V-0 |
| Contact Material | Phosphor Bronze 0.46mm Round Pin |
| Contact Plated | Gold Plating Over Nickel |
| Shielding | 0.20mm thickness copper alloy, plated with nickel |
| Electrical | |
| Voltage Rating | 125 V AC RMS |
| Current Rating | 1.5 Amp |
| Contact Resistance | 30mΩ Max. |
| Insulation Resistance | 500MΩ Min. @ 500 VDC |
| Dielectric Withstanding Resistance | 1000 VAC RMS 60Hz, 1 Min. |
| Mechanical | |
| Durability | 750 Cycles Min. |
| PCB Retention Force | 10 LBS Min. |
| Environmental | |
| Storage Temperature | -40°C to +85°C |
| Operation Temperature | -40°C to +85°C |
Category and Tags:
Stacked RJ45
