1 by 1 SFP Cage with Heat Sink

1 by 1 SFP Cage with Heat Sink
Hover to enlarge
Part#: SFPA-PTE1121
Material: Copper Alloy
Number of Ports: 1 by 1
Heat Sink: With
Termination: Press-Fit
EMI: Spring Fingers
Mounting Type: Through Hole, R/A
Packing: Tray
Drawing: 1 by 1 SFP Cage with Heat Sink DrawingSFPA-PTE1121

Product Overview

SFPA-PTE1121 is a 1 by 1 Single Port SFP Cage with Heat Sink Assembly, Press-Fit Termination; with EMI spring fingers; cage dimensions: 48.8mm * 14.50mm * 9.40mm.

Note for SFP Cage Heat Sink

Material: Aluminum, Ni plating for all;
Clip: SUS 301½H T=0.25mm, No plating.
1x1 SFP Cage with Heat sink Drawing


Electrical Performance
Current Rating 0.5 Amp
Voltage Rating 3.3 V AC
Insulation Resistance 1000 MΩ Min
Withstand Voltage 300 V DC OR AC PEAK 50 Hz or 60 Hz /minute
Contact Resistance 70 mΩ Max.
Mechanical Specifications
Insertion/ Extraction Force 40N Max/11.50N Max
Durability 40N Max/11.50N Max (Repeatedly insert and Extract the optical module 100 times at a rate of 500 times per hour)
Retention force 90~170N
Insertion force/ Retention force (Per PIN with PCB by Press-fit ) 30N Max/8N Min
Press-fit force with PCB(All Pins) 500N Max
Contact normal force 0.30N Min
Durability 100 cycles Min.
Operating Temperature -55°C ~ +85°C
Storage Temperature -55°C ~ +105°C (Relative humidity<80%)
Storage Time 12 months
Plastic Housing PBT( ) PA46( ) PA66( ) LCP(✓)
Flammability rating UL94V-0(✓) UL94V-1( ) UL94V-2( ) UL94-HB( )
Termination Phosphor bronze, gold plating over nickel
Selective Gold plating Fu( ) G/F( ) 3u( ) 6u( )15u( ) 30u( ) 50u( )

Category and Tags: SFP Cage Connectors

Request a Quote

5 + 4 = ?

Please fill in the blank with the correct answer and click submit.